Instant Pot Pressure Cooker Time Converter

Your recipe needs 60 minutes on the stove, but you want to pressure cook it — this Instant Pot Pressure Cooker Time Converter turns that into an approximate pressure-cooking time using the one-third rule.
Free calculator
Use the calculator
Enter your values below, then press Calculate. Your inputs stay in your browser — nothing is sent anywhere.
Result appears in the highlighted box above. The formula used is shown in “How the math works” below, so you can check every answer.
How to use it
- Choose the Time you have — conventional stove / oven time, or slow-cooker time — then enter the Cooking time in minutes, and the Liquid in the pot for the come-to-pressure estimate.
- Choose the Food type closest to what you are cooking — the multiplier and the natural-release time depend on it: beef stew, beans, and other dishes use 0.33, chicken pieces use 0.3, and rice and vegetables use 0.25.
- Press Calculate. The result shows the approximate pressure cooking time, which is about one-third of the conventional time.
- The result includes the come-to-pressure estimate and the natural-release time for your food, plus a planning total, so the whole job is covered — not just the minutes under pressure.
- Check that the food is fully cooked before serving, and never fill the cooker past the maximum fill line.
Worked example
With the values already filled in on the page — conventional cooking time 60 minutes, food type beef stew — press Calculate and the calculator returns 19.8 minutes under pressure (about 20 minutes, approximate).

To check it by hand: 60 × 0.33 = 19.8. That is the time under pressure only; add about 12 minutes to come to pressure (500 ml–1 liter of liquid) and 10 minutes of natural release for beef stew, for a planning total of about 42 minutes (19.8 + 12 + 10 = 41.8).
How the instant pot pressure cooker time converter works
Pressure cooking time is approximately one-third of conventional cooking time: pressure time = conventional time × 0.33 for beef stew, beans, and other dishes; chicken pieces use × 0.3, and rice and vegetables use × 0.25. This is a general approximation, not a precise rule for every food, because food size, density, and starting temperature also matter. A slow-cooker time is first turned into an oven time (slow-cooker minutes ÷ 3), then the same multiplier is applied. Come-to-pressure time depends on the liquid in the pot: about 10 minutes under 500 ml, about 12 minutes for 500 ml–1 liter, and about 15 minutes over 1 liter. Natural release is about 10 minutes for stew, chicken, beans, and rice, 5 minutes for other dishes, and 0 minutes for vegetables (quick release). The table below shows the same rule applied to common conventional times.

| Conventional time (minutes) | Pressure time (minutes, approximate) |
|---|---|
| 30 | 9.9 |
| 60 | 19.8 |
| 90 | 29.7 |
| 120 | 39.6 |
Common mistakes
- Counting only the pressure minutes as the total time. A cooker also needs time to come to pressure and, often, time for natural release. The meal will take longer than the pressure time alone.
- Using the same time for every food. Dense foods, large pieces, and dried beans behave differently from vegetables or rice. The one-third rule is a starting point, not a guarantee for every ingredient.
- Releasing pressure at once for every dish. Some dishes, especially beans, grains, and large meat pieces, need natural release to finish cooking and to avoid liquid spraying from the valve. Follow the recipe and the cooker instructions.
- Filling past the maximum fill line. Overfilling can block the valve and is unsafe, especially with foods that foam or expand, such as beans and grains. Stay below the line marked on your cooker.
- Serving without checking doneness. If meat or beans are not tender at the end of the pressure time, cook for a few more minutes under pressure rather than assuming the one-third rule was exact.
A note before you start
Start with the converted time, then test. If the food is undercooked, add a few minutes under pressure next time; if it is overcooked or mushy, shorten the time. Write the time that worked for your cooker and your piece size on the recipe, because the same dish can need a different time in a different cooker.
Frequently asked questions
Is one-third exact for every recipe?
No. It is an approximation. Piece size, density, liquid amount, and starting temperature all change the result, so treat the converted time as a starting point and check doneness.
Does the result include the time to reach pressure?
Yes — the result shows the come-to-pressure estimate (about 10–15 minutes, by the liquid in the pot) and the natural-release time for your food, plus a planning total that adds pressure time, come-to-pressure time, and release time together.
What is natural release, and when do I use it?
Natural release means letting the pressure fall on its own without opening the valve. It is commonly used for beans, grains, and large meat pieces, where it also adds gentle cooking time. Quick release opens the valve at once and suits some vegetables and dishes that overcook easily.
Can I convert a slow-cooker time the same way?
Yes — choose Slow-cooker time in the tool: the calculator first turns it into an oven time (slow-cooker minutes ÷ 3), then applies the pressure multiplier for your food. For example, 480 slow-cooker minutes becomes 160 oven minutes, then about 53 minutes under pressure for beef stew.
Why does my cooker manual give a different time?
Manual times are tested for that cooker and for a stated piece size and liquid amount, so they can differ from a general rule. Where they conflict, follow the manual for your cooker and adjust from there.
Related: Small Appliances · Roast Turkey Time Calculator · Measurement Converter · All calculators
Results are estimates for home cooking. Always check food with a thermometer and follow the manufacturer's instructions for your equipment.