Independent comparisons• Spec-based, not sponsored • No fake reviewsFollow on Pinterest ↗Follow on Facebook ↗Follow on Instagram ↗

Sourdough Starter Feeding Calculator

A bubbly sourdough starter in an open glass jar with a wooden spoon and a loaf of sourdough bread beside it

You are keeping 50 g of starter — how much flour and water do you add at a 1:1:1 feeding? This Sourdough Starter Feeding Calculator works it out for the ratio you choose.

Free calculator

Use the calculator

Enter your values below, then press Calculate. Your inputs stay in your browser — nothing is sent anywhere.

Enter your values and press Calculate.

Result appears in the highlighted box above. The formula used is shown in “How the math works” below, so you can check every answer.

How to use it

  1. Choose the Direction: starter to keep, or starter needed for a bake. Then enter the Starter to keep (g) — the amount of starter you will feed, not the full amount in the jar — or the Starter needed (g), if you chose that direction. Enter the Starter in the jar now too, and the tool shows how much to discard.
  2. Choose the Feeding ratio — 1:1:1 is the default, with 1:2:2, 1:3:3, and 1:5:5 for a larger feeding.
  3. Press Calculate. The result shows flour to add, water to add, and the total after feeding.
  4. Remove the extra starter first, then add the flour and water amounts shown and mix well.
  5. Read the Common mistakes section before you change feeding frequency or ratio.

Worked example

With the values already filled in on the page — 50 g of starter to keep and a 1:1:1 feeding ratio — press Calculate and the calculator returns flour to add: 50 g, water to add: 50 g, and total after feeding: 150 g. That is the exact result the page produces.

A jar of sourdough starter on a digital scale while flour is spooned in, with a bowl of flour and a jug of water beside it

To check it by hand: flour is 50 × 1 = 50, water is 50 × 1 = 50, and the total is 50 + 50 + 50 = 150. The other way round: if you need 200 g of starter at 1:1:1, keep 200 ÷ 3 = 66.7 g and feed it 66.7 g of flour and 66.7 g of water. If the jar holds 300 g now, discard or use 300 − 66.7 = 233.3 g first.

How the sourdough starter feeding calculator works

A feeding ratio is written as starter: flour: water. At 1:1:1, flour to add = starter kept × 1 and water to add = starter kept × 1. At 1:2:2, both are starter kept × 2. Total after feeding = starter kept + flour added + water added. For 50 g kept at 1:1:1, that is 50 + 50 + 50 = 150 g. These are approximate planning weights; a little flour left on the spoon or a wet jar will shift the real total slightly. To work backwards from the starter you need, keep = needed ÷ (1 + 2 × ratio number): at 1:1:1 that is needed ÷ 3. Peak time depends on temperature: at room temperature (about 22°C / 72°F) a 1:1:1 feeding peaks in about 4–6 hours, in a cool kitchen (about 18°C / 65°F) in about 6–8 hours, and in a warm kitchen (about 26°C / 79°F) in about 3–4 hours. A larger ratio takes longer to peak at the same temperature.

A jar of bubbly sourdough starter beside a bowl of flour and a bowl of water each weighed on a digital scale
Starter keptRatioFlour to addWater to addTotal after feeding
50 g1:1:150 g50 g150 g
50 g1:2:2100 g100 g250 g
100 g1:2:2200 g200 g500 g
20 g1:5:5100 g100 g220 g

Common mistakes

A note before you start

Keep a small, regular routine and use the same flour and water each time, so you can tell when something has changed. If your starter is sluggish, check temperature and feeding consistency first, before changing flour type or ratio — a cold kitchen or an inconsistent feeding amount is a common cause.

Frequently asked questions

What does 1:1:1 mean?

It means equal weights of starter, flour, and water. For 50 g of starter, you add 50 g of flour and 50 g of water, giving 150 g in total after feeding.

Why do I need to remove starter before feeding?

Because feeding the full amount every time makes the starter grow with each feeding and leaves too little fresh flour and water per gram of starter. Keeping a fixed amount and feeding that amount keeps the starter active and the jar manageable.

When should I use 1:2:2 instead of 1:1:1?

When you need more starter for a recipe, or when you want a slower rise — for example, overnight in a warm kitchen. A larger feeding gives the yeast and bacteria more fresh flour to work through, so it takes longer to peak.

Should flour and water be weighed or measured in cups?

Weighed, in grams. Ratios are by weight, and a cup of flour weighs much less than a cup of water, so volume measures will not give the intended ratio.

How much starter should I keep?

Only as much as you need for your next bake plus a small reserve to keep the culture going. Keeping 50 g is a practical default for home baking; larger amounts use more flour at every feeding without making the starter stronger. If you know the amount you need, choose the need direction in the tool and it works out the keep amount for you — for example, 200 g needed at 1:1:1 means keeping 66.7 g.

Related: Bakeware · Recipe Serving Scaler · Cups-to-Grams Converter · All calculators

Results are estimates for home cooking. Always check food with a thermometer and follow the manufacturer's instructions for your equipment.

Found this helpful? Share it:

Help a friend with a small kitchen too.

Copy link to share on Instagram.